dp-Pro Model ab 1.395,00 € "ex. Vat"
Operating options:
WiFi/WLAN
Apps for Android, iOS & remote control
with a volume flow > up to 700 m³/h.
HEPA H14 filter & activated carbon filter in Dust and Pollution air purifier lamp
Operationg Mode:Room air is drawn into the lamp from below, passes through a HEPA H14 filter and an activated carbon filter, and finally flows into the fan. The fan accelerates the air so that it is expelled from the top of the luminaire at an increased speed. Due to the air flow, the air is expelled radially on all sides, so that a clean carpet of air is created at the top, from which air is continuously expelled downwards due to the constant inflow of clean air, displacing the stale air there. Thus, on the one hand, a large-area intake and on the other hand a large-area distribution of the cleaned air in the room is achieved. The central arrangement of the air purifier and the optimised air-flow result in a largely uniform cleaning effect throughout the room.
The HEPA H14 filter filters particles out of the air. Particles from 0.1 to 10 μm in size are filtered up to 99.995 %. This means that most bacteria, viruses and other germs are also trapped in the filter.
The activated carbon filter collects the volatile hydrocarbons.
These are often harmful gases emitted by solvents, adhesives and synthetic resins in furniture, floor coverings and other building materials with plastic content or paint coatings. Highly volatile hydrocarbons are also found in exhaust fumes from road traffic.
Filter change HEPA H14 filter & activated carbon filter in our air purification lamp
dp-lamp monitors the particle load entering the filter with the air. From this, the expected time for the next filter change is calculated. At approx. 80 % exhaustion level, the app issues a warning. When the filter is exhausted, the fan can no longer be switched on.
Change the filter when the app prompts you to do so. To ensure cleaning performance, only use original filters from the dp Lamp manufacturer. These can be ordered directly in the app.
Remove the cover from the bottom of the housing. The filter cover is held in place by 6 magnets. To remove the filter cover, grasp one or more of the recessed grips and pull the cover down.
Automatic calculation of the volume flow for clean air
You can use the dp-lamp app to calculate the optimal volume flow for your office, living room, classroom, etc.. This is done based on the scientific studies for the reduction of aerosol concentration in rooms. According to the specification, an air exchange should take place three times per hour. When the room dimensions are entered, the app calculates the necessary volume flow.